Need help?Do you have a question about the Hill-Rom careselections Synergy Air Elite and is the answer not in the manual?
General| Product Type | Therapeutic Support Surface |
|---|---|
| Dimensions | 80" L x 36" W x 8" H |
| Category | Medical |
| Therapy Modes | Alternating Pressure, Static |
| Power Requirements | 120V, 60Hz |
| Features | low air loss |
Explains standard text, boldface, and notes for clarity.
Identifies warnings for caught, chemical, and electrical hazards.
System not for unstabilized spinal cord injury or pediatric use.
Details functions of Comfort Control, Cycle Timer, Alternate, Static, Auto Firm, Standby/Operate.
Indicates power loss; alarm can be reset.
Emphasizes evaluating entrapment risk and ensuring siderail latching.
Covers shock, flammable gases/liquids, sharp objects, and heat warnings.
Use under physician order; only authorized personnel for servicing.
Step-by-step guide for setting up the therapy system.
Procedure for rapid deflation using the CPR release.
How to start alternating mode and set the cycle timer.
Provides continuous low airloss therapy.
For quick inflation and uniform firmness.
How the alarm functions and how to reset it.
Use mild detergent and water; avoid harsh chemicals.
Cleaning the control unit with a damp cloth and disinfectant.
Cleaning the mattress and washing/discarding coverlets.
Warning against using steam cleaning devices.
Methods for removing tough stains.
Guidelines for disinfecting the unit.
Stressing the need for authorized personnel for maintenance.
Information needed for service calls, like the serial number.
Steps for when the control unit does not operate.
Diagnosing and fixing uneven air pressure in cells.
Troubleshooting steps when the mattress does not inflate.
Specifies temperature and humidity for storage.
To Next Page