Hillphoenix JNRBHSA - User Manual

JNRBHSA
JNRZHSA
P112746E
V.1 R.04
08/19
REACH-IN SELF-CONTAINED MERCHANDISER
INSTALLATION & OPERATIONS MANUAL
General Information ............................................... 6
Installation & Trim Out .....................................7-17
Connections & Piping ..........................................18
Pre-Power Checklist ............................................19
Airfl ow & Case Temperature ................................20
Fans & Case Cleaning .........................................21
Parts Ordering ......................................................22
Appendices ...........................................................23
Table of Contents
To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualifi ed tech-
nicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/
service contractors, please visit our website at www.hillphoenix.com.

Summary

General Information Overview

Case Description and Conditions

Case Installation Procedures

Delivery and Unpacking

Steps for receiving and preparing the case for movement and installation.

Floor Preparation and Leveling

Guidelines for preparing the installation floor and ensuring proper case leveling.

Case Line-up and Assembly

Instructions for aligning and joining multiple cases or installing a single case.

Trim Out and Final Assembly

Steps for completing the case trim, including drain and pump setup.

Condensing Unit and Dampener Installation

Installing the condensing unit and optional noise dampener.

Case Connections and Wiring

Refrigeration and Plumbing Connections

Details on connecting refrigerant lines and drain/pump systems.

Electrical Connections and Safety

Information on electrical junction box, controller, and safety precautions.

Pre-Power Checklist

Airflow, Defrost, and Temperature Controls

Airflow and Product Load Guidelines

Defrost System Operation

Explanation of case defrost types and termination sensors.

Case Cleaning and Fan Maintenance

Cleaning Procedures and Precautions

Recommended cleaning schedule and safety steps for maintenance.

Fan Assembly Removal and Installation

Technical Reference Sheets

Technical Reference Sheet A2

Technical Reference Sheet A6

Seismic Brackets Installation

Option 1: Wall Mounting

Option 2: Base Frame Mounting

Case Top Fascia Installation

Coil Shroud and Fascia Attachment

Electrical Box and Wiring Installation

Electrical Wiring Diagrams

Power Input and Wire Identification

Diagrams showing power input, wire identification, and controller connections.

Detailed Wiring Diagrams

Carel IR33+ Controller Settings

How to Set the Setpoint

Procedure for adjusting the temperature setpoint on the controller.

Accessing and Setting Parameters

Guide to accessing and modifying controller parameters.

Alarm Causes and Status Indicators

Explanation of alarm codes, icons, and status indicators.

Fascia Frame Installation

Basic Fascia Assembly

Case Lifting Locations for Forklift

2-Door and 3-Door Case Lifting

4-Door and 5-Door Case Lifting

Condensing Unit Locations

JNRBHSA Unit Location Dimensions

JNRZHSA Unit Location Dimensions

Hillphoenix JNRBHSA Specifications

General

Brand	Hillphoenix
Model	JNRBHSA
Category	Merchandiser
Language	English