The Hillvert HT-PILOT-1500 is a gasoline pile driver designed for driving posts into the ground. It is a robust and powerful tool suitable for various applications, from fencing to construction.
Function Description
The HT-PILOT-1500 operates by converting the rotational energy of its gasoline engine into powerful impacts, effectively driving posts into the ground. This method significantly reduces the physical effort required compared to manual post-driving techniques. The device is designed for efficiency and ease of use, making it suitable for both professional and private users. It can handle a range of post diameters, offering versatility for different projects.
Important Technical Specifications
- Product Name: Gasoline Pile Driver
- Model: HT-PILOT-1500
- Engine Type: 44 x 34 mm, 1-cylinder, 2-stroke, air-cooled, mixed gasoline-oil (25:1 mixture)
- Fuel Tank Capacity: 1.3 liters
- Cylinder Displacement: 52 cm³
- Maximum Torque: 2.5 Nm (5000 U/min)
- Fuel Consumption: ≤0.6 l/h
- Impact Frequency: 700-1350 U/min
- Impact Energy: 20-55 J
- Starting System: Manual starter
- Maximum Engine Speed: 10500 U/min
- Maximum Idling Speed: 3500 U/min
- Sound Pressure Level (LpA): 101 dB(A)
- Sound Power Level (LwA): 112.1 dB(A)
- Vibration Level (ahv): 13.891 m/s² (K=1.5 m/s²)
- Dimensions (LxWxH): 280x266x626 mm
- Weight: 20 kg
- Spark Plug Type: BM6A
Usage Features
The HT-PILOT-1500 is designed for straightforward operation. Before starting, ensure the fuel tank is filled with the correct 25:1 gasoline-oil mixture. The device is started using a manual pull starter.
Starting the Device:
- Set the choke lever to the "ON" position.
- Press the primer bulb 5-10 times until fuel is visible.
- Set the throttle lever to the "START" position.
- Pull the starter rope until the engine starts.
- Once the engine is running, gradually move the choke lever to the "OFF" position.
- Allow the engine to warm up for a few minutes before operating under load.
Driving Posts:
- Select the appropriate adapter sleeve for the post diameter. The device comes with adapters for diameters of 20-49 mm, 50-69 mm, and 70-100 mm.
- Place the adapter sleeve over the post.
- Lift the pile driver and position it over the post, ensuring it is centered and stable.
- Hold the device firmly with both hands.
- Engage the throttle to begin the hammering action.
- Apply downward pressure to guide the post into the ground.
- Once the post is driven to the desired depth, release the throttle and turn off the engine.
Safety Precautions:
- Always wear appropriate personal protective equipment (PPE), including hearing protection, eye protection, head protection, and protective gloves.
- Ensure the work area is clear of bystanders and obstacles.
- Never operate the device under the influence of alcohol, drugs, or medication.
- Regularly check the device for any damage or loose parts before use.
- Do not modify the device in any way.
- Keep hands and feet away from moving parts.
- Refuel in a well-ventilated area with the engine off and cool.
Maintenance Features
Regular maintenance is crucial for the longevity and optimal performance of the HT-PILOT-1500.
Daily/Before Each Use:
- Visual Inspection: Check for any damage, loose screws, or worn parts.
- Fuel Filter: Check for contamination. Clean or replace if necessary.
- Air Filter: Check for dirt and debris. Clean or replace if necessary.
- Spark Plug: Check the electrode gap (0.5-0.7 mm) and clean or replace if necessary.
- Cooling Fins: Ensure they are clean and free of debris to prevent overheating.
- Muffler: Check for blockages.
After 20 Hours of Operation (or annually):
- Carburetor: Clean the carburetor to remove any fuel residues or blockages.
- Gearbox Lubrication: Check and top up the gearbox oil. The gearbox should be lubricated with a suitable grease.
- Cylinder Lubrication: After approximately 50 hours of operation, lubricate the impact cylinder. Remove the cylinder head and apply about 50g of grease to the impact mechanism.
- Fuel Tank: Clean the fuel tank to remove any sediment.
- Spark Plug: Replace the spark plug.
- Muffler: Inspect and clean the muffler.
Storage:
- When storing the device for an extended period, drain the fuel tank and carburetor to prevent fuel degradation and blockages.
- Clean the device thoroughly before storage.
- Store in a dry, well-ventilated area, out of reach of children and unauthorized persons.
Disposal:
- The device and its components should not be disposed of with household waste.
- Follow local regulations for the proper disposal of electronic and electrical equipment, batteries, and lubricants.
- Recycle materials whenever possible.
By adhering to these usage and maintenance guidelines, users can ensure safe and efficient operation of the Hillvert HT-PILOT-1500 gasoline pile driver for many years.
Need help?
General
To Next Page
