Need help?Do you have a question about the hillvert HT-ROBSON-SP2200-72 and is the answer not in the manual?
General| Power | 2200 W |
|---|---|
| Voltage | 230 V |
| Protection Class | IPX8 |
| Maximum Immersion Depth | 7 m |
| Maximum Liquid Temperature | 35 °C |
| Cable Length | 10 m |
| Frequency | 50 Hz |
| Maximum Flow Rate | 18000 L/h |
Ensure the device plug matches the socket for reduced electric shock risk.
Prevent contact with earthed surfaces and water ingress to reduce electric shock hazards.
Do not touch the device with wet or damp hands to prevent electric shock.
Use cables correctly, avoid damage, and keep away from heat and sharp edges.
Utilize outdoor-rated extension cords for external use to minimize shock risks.
A damaged power cord must be replaced by a qualified electrician or manufacturer's service.
Maintain a clean, well-lit workspace and avoid explosive environments for safe operation.
Report damage or maloperation immediately; contact service for operational uncertainties.
Do not operate when impaired; stay attentive, use common sense, and ensure you are fit to use the device.
Ensure switch is off before connecting, maintain balance, and keep hands away from moving parts.
Keep children supervised and away from the device; it is not a toy.
To Next Page
