hilscher PKV 30-DPS

To Next Page

To Previous Page

Index Date Device Device

number

Chapter Revision

1 16.08.96 PKV 30-DPS 9604001 all translated from german manual

2 22.08.96 PKV 30-DPS 9604002 2 PROFIBUS-DP slave address selectable by code switch

pictures and tables updated

3 06.05.98 PKV 30-DPS 9604002 2 Activation of the diagnostic/configuration mode described mor

detailed

4 29.01.99 PKV 30-DPS 9604002 2.4 revision

5 16.11.01 PKV 30-DPS 9604002 2.1.2 Selection of the Bootstart Mode or Normal Mode

Although this appliance has been developed with great care and intensively tested, Hilscher Gesellschaft

für Systemautomation mbH cannot guarantee the suitability of this appliance for any purpose not confir-

med by us in writing.

Guarantee claims shall be limited to the right to require rectification. Liability for any damages which

may have arisen from the use of this appliance or its documentation shall be limited to cases of intent.

We reserve the right to modify our products and their specifiactions at any time in as far as this contribu-

tes to technical progress. The version of the manual supplied with the appliance applies.

Revision 2

hilscher PKV 30-DPS - Page 2