Hilti HIT-RE 100 - User Manual

Hilti HIT-RE 100 mortar w/
rebar (as post-installed conn.)
04 / 2016 2
Hilti HIT-RE 100 mortar with rebar
(as post-installed connection)
Injection mortar system
Benefits
Hilti
HIT-RE 100
330 ml foil pack
(also available
as 500 ml
and 1400 ml
foil pack)
- suitable for concrete C 12/15 to
C 50/60
- high loading capacity
- suitable for dry and water
saturated concrete
- for rebar diameters up to 40 mm
- non corrosive to rebar elements
- long working time at elevated
temperatures
- suitable for embedment length till
3200 mm
Statik mixer
Rebar
Base material
Load conditions
Concrete
Dry concrete
Wet concrete
Static/
quasi-static
Installation conditions
Other informations
Hammer
drilling
Diamond
coring
Compressed air
drilling
European
Technical
Approval
CE
conformity
Corrosion
tested
Service temperature range
Temperature range: -40°C to +80°C (max. long term temperature +50°C, max. short term temperature +80°C).
Approvals / certificates
Description
Authority / Laboratory
No. / date of issue
European technical assessment
DIBt
ETA – 15/0883 / 2016-04-21
a)
All data given in this section according to the approvals mentioned above ETA-15/0883 issue 2016-04-21

Hilti HIT-RE 100 Specifications