Hilti SIW 22-A - Page 10

8 English
@
Hex. socket (SID)
;
Illumination
=
Forward/reverse selector switch with safety
lock
%
Control switch (with electronic speed
control)
&
Square drive (SIW)
(
Torque selector button
)
Belt hook (optional)
+
Battery state-of-charge display
§
Release buttons (B22/… battery)
/
Release button (B14/… battery)
3.2 Intended use
The product described is a hand-held cordless impact screwdriver. It is designed for driving and removing
screws and for tightening and releasing nuts and bolts in wood, metal, masonry and concrete.
▶ For this product use only Hilti Liion batteries of the B14 (SID/SIW 14A) or B22 (SID/SIW 22A) series,
as applicable.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Charge status display
The charge status of the Liion battery is displayed after pressing one of the release buttons lightly (press
only until slight resistance is felt).
Status Meaning
4 LEDs light. • Charge status: 75 % to 100 %
3 LEDs light. • Charge status: 50 % to 75 %
2 LEDs light. • Charge status: 25 % to 50 %
1 LED lights. • Charge status: 10 % to 25 %
1 LED blinks. • Charge status: < 10 %
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
3.4 Items supplied
Impact screwdriver/wrench, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by us for use with the product can be found at your
local Hilti Center or online at: www.hilti.group
4 Impact screwdriver/wrench
SID 14A SIW 14A
Rated voltage
14.4 V 14.4 V
Weight in accordance with EPTA proce-
dure 01
1.3 kg 1.3 kg
Rated speed under no
load
Setting I
0 /min …1,000 /min 0 /min …1,000 /min
Setting II
0 /min …1,500 /min 0 /min …1,500 /min
Setting III
0 /min …2,500 /min 0 /min …2,300 /min
Impact speed
≤ 3,100 bpm ≤ 3,400 bpm
Torque adjustment
3 settings 3 settings
Large standard bolts
M8 to M16 M8 to M16
Large high-strength bolts
M6 to M12 M6 to M12
Socket/bit drive
1
/
4
″ hex. socket with lock-
ing ring
1
/
2
″ square drive with
ball-notch retention
or
3
/
8
″ square drive with
locking ring
Printed: 06.06.2017 | Doc-Nr: PUB / 5155094 / 000 / 03