Hilti SIW 22-A - Product Use and Care; Power Tool Use and Care; Battery Tool Use and Care

English 9
SID 22A SIW 22A
Rated voltage
21.6 V 21.6 V
Weight in accordance with EPTA proce-
dure 01
1.5 kg 1.5 kg
Rated speed under no
load
Setting I
0 /min …1,000 /min 0 /min …1,000 /min
Setting II
0 /min …1,500 /min 0 /min …1,500 /min
Setting III
0 /min …2,500 /min 0 /min …2,300 /min
Impact speed
≤ 3,450 bpm ≤ 3,500 bpm
Torque adjustment
3 settings 3 settings
Large standard bolts
M8 to M16 M8 to M16
Large high-strength bolts
M6 to M12 M6 to M12
Socket/bit drive
1
/
4
″ hex. socket with lock-
ing ring
1
/
2
″ square drive with
ball-notch retention
or
3
/
8
″ square drive with
locking ring
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
SID 14A SIW 14A SID 22A SIW 22A
Sound (power) level (L
WA
)
94 dB(A) 94 dB(A) 97 dB(A) 97 dB(A)
Uncertainty for the sound
power level (K
WA
)
3 dB(A) 3 dB(A) 3 dB(A) 3 dB(A)
Emission sound pressure
level (L
pA
)
83 dB(A) 83 dB(A) 86 dB(A) 86 dB(A)
Uncertainty for the sound
pressure level (K
pA
)
3 dB(A) 3 dB(A) 3 dB(A) 3 dB(A)
Total vibration
SID 14A SIW 14A SID 22A SIW 22A
Vibration emission value when tighten-
ing screws/bolts and nuts of the maxi-
mum permitted size (a
h
)
7.5 m/s² 7.5 m/s² 11 m/s² 11 m/s²
Uncertainty for tightening
screws/bolts and nuts of the maximum
permitted size
1.5 m/s² 1.5 m/s² 1.5 m/s² 1.5 m/s²
4.2 Setting the torque
The torque is selected by way of the torque selector button.
Printed: 06.06.2017 | Doc-Nr: PUB / 5155094 / 000 / 03