Hilti ST 1800 - Technical Data

*378503*
378503 English 7
The power tool is designed for driving and removing screws in drywall
installation work.
It is possible to use a stand-up tool extension for driving collated screws.
3.3 Main applications / torque settings
Application Screw type Diam-
eter in
mm
Torque
setting
Sheet metal to sheet metal SMD
SMD
S-MS
4.2
4.8
4.8
1 - 2
1 - 8
1 - 8
Sheet metal to steel profile S-MD 51 + S-
MD 21
S-MD 53 + S-
MD 23
SMP 52
5.5
5.5
6.3
8 - 13
6 - 11
4 - 12
Sheet metal to steel beam S-MD 55 + S-
MD 21
SMP 53
5.5
6.5
2 - 7
8 - 14
Sheet metal to timber SMP 53 6.5 14 - 18
Fiber-cement board on steel profile S-FD 03 6.3 6 - 12
Fiber-cement board on steel beam S-FD 05 6.3 12 - 15
Fiber-cement board on wood S-FD 01 6.5 12 - 18
Sandwich panel to steel profile SCD 63 5.5 2 - 7
Sandwich panel to steel beam SCD 65 5.5 2 - 9
Sandwich panel to wood SCDW 61 6.5 5 - 8
3.4 Items supplied
Metal construction screwdriver, STDG 17 depth guage, operating instruc-
tions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
4 Technical data
For rated voltage, rated current, frequency and/or input power, refer to
the country-specific type identification plate.
If the tool is powered by a generator or transformer, the generator or
transformer’s power output must be at least twice the rated input power