Hiltron security PROTEC4 - Introduction to Alarm Systems; System Operating Features

Index
Chapter 1 Introduction 19
1.1 Central unit description ...................................................................................19
1.2 Operating features ..........................................................................................19
1.3 Technical features ...........................................................................................20
Chapter 2 Installation 21
2.1 General instructions ........................................................................................21
2.2 Power supply...................................................................................................21
2.3 Connections ....................................................................................................22
2.3.1 Electronic key and antitearing protection tamper................................23
2.3.2 Reed contacts and volumetric detectors..............................................24
2.3.3 Telephone dialer ..................................................................................25
2.3.4 Sirens...................................................................................................26
Chapter 3 Programming 27
3.1 Exiting time regulation.....................................................................................27
3.2 Entering time regulation ..................................................................................27
3.3 Alarm time regulation ......................................................................................27
Chapter 4 Operating 28
4.1 Panel description.............................................................................................28
4.2 System enabling..............................................................................................29
4.2.1 Enabling by the front panel key ...........................................................29
4.2.2 Enabling by other command system....................................................29
4.3 System disabling.............................................................................................30
4.3.1 Disabling by the front panel key...........................................................30
4.3.2 Disabling by other command system...................................................30
4.4 Zones operating ..............................................................................................31
4.4.1 Zone 1 (delayed)..................................................................................31
4.4.2 Zone 2 (immediated)............................................................................31
4.4.3 Zone 24h (immediated)........................................................................31
4.5 Alarm memory.................................................................................................31
Chapter 5 Maintenance 32
5.1 Components to change...................................................................................32
5.2 Cleaning..........................................................................................................32
5.3 Fuses .............................................................................................................32
Serie TM / Serie PROTEC burglary central unit - User’s manual
1 Introduction
1.
! System partialization by buttons.
! System enabling/disabling by built-in mechanic key,or optional command systems
! Auto-inhibition of every zones, if it not restored, after it had born an alarm.
! Adjustable exit timing 4 ÷ 75 sec (PROTEC4, PROTEC9), 5 ÷ 90 sec (TM500P,TM900P).
4÷75 sec (PROTEC4, PROTEC9),5÷90 sec (TM500P, TM900P)
! Adjustable alarm duration 180 ÷ 600 sec.
! Control LED main:
! Antiopening protection tamper.
! Antitearing protection tamper (only PROTEC Series).
! Operating temperature +5°C ÷ +40°C
1 TM Series and PROTEC Series central unit description
The PROTEC Series and TM Series burglary central units, planned with microprocessor technology,
are to be used in the context of an antitheft protection system for residencial and trade places.
The TM Series burglary central units must be installed exclusively by using components of the
modular TM Series: they have to be installed in TM3, TM4 or TM4C boxes, with TM35SW power
supplier/battery charger.
The PROTEC4 and TM400P panel manage an antitheft system for 3 zones protection with one zone
for the anti-sabotage protection (24h); the TM500P panel manages 5 zones, with one anti-sabotage zone
24h; the PROTEC9 and TM900P panel manage an antitheft system for 8 zones protection more one zone
for the anti-sabotage protection (24h).
It centers them antitheft Series PROTEC and Series TM go used in coupling to magnetic sensors of
perimetrale protection, in coupling to volumetric detectors of presence, or whichever other sensor of type
NC. The alarm can be: sonorous/luminous, in autoalimentata coupling to the sirena for outside SA310;
sonorous, in coupling to the sirena piezoelectric for inner SP31; telephone, in coupling to telephone
combinatori TD92, TDC22, TDC30, ERMES or, for the panels only center them antitheft Series TM, in
coupling to a combinatore panel telephone TM92P, TM20GSM, TM60GSM, using container TM4C.
> PROTEC4 e PROTEC9: voltage present,time of exit,alarm
state,zones state,alarm
memory,fusible state services
> TM400P, TM500P e TM900P: voltage,time of exit,alarm state,zone
state,alarm memory
! Output:
> TM400P e PROTEC4: activation sirens Ext/Int,positive
present of system activated
> TM500P, TM900P e PROTEC9: activated siren Ext/Int,positive present
to inserted,exited relè on alarm
1.2 Operating features
! Adjustable entrance timing .
Introduction
18 19
security security