HIMA HIMax X-DI 32 02 - Pin Assignment for Connector Boards with Cable Plug

X-DI 32 02 3 Product Description
HI 801 017 E Rev. 4.00 Page 25 of 56
3.6.6 Pin Assignment for Connector Boards with Cable Plug
HIMA provides ready-made system cables for use with these connector boards, see
Chapter
3.7. The cable plug and the connector boards are coded.
i
Connector pin assignment!
The following table describes the connector pin assignment of the system cable plug.
Lead marking based on DIN 47100:
c b a
Row
Signal Color Signal Color Signal Color
1 S32+ PK-BN
1)
DI32+ WH-PK
1)
Reserved BN-RD
1)
2 S31+ GY-BN
1)
DI31+ WH-GY
1)
Reserved WH-RD
1)
3 S30+ YE-BN
1)
DI30+ WH-YE
1)
Reserved BN-BU
1)
4 S29+ BN-GN
1)
DI29+ WH-GN
1)
Reserved WH-BU
1)
5 S28+ RD-BU
1)
DI28+ GY-PK
1)
6 S27+ VT
1)
DI27+ BK
1)
7 S26+ RD
1)
DI26+ BU
1)
8 S25+ PK
1)
DI25+ GY
1)
9 S24+ YE
1)
DI24+ GN
1)
10 S23+ BN
1)
DI23+ WH
1)
11 S22+ RD-BK DI22+ BU-BK
12 S21+ PK-BK DI21+ GY-BK
13 S20+ PK-RD DI20+ GY-RD
14 S19+ PK-BU DI19+ GY-BU
15 S18+ YE-BK DI18+ GN-BK
16 S17+ YE-RD DI17+ GN-RD
17 S16+ YE-BU DI16+ GN-BU
18 S15+ YE-PK DI15+ PK-GN
19 S14+ YE-GY DI14+ GY-GN
20 S13+ BN-BK DI13+ WH-BK
21 S12+ BN-RD DI12+ WH-RD
22 S11+ BN-BU DI11+ WH-BU
23 S10+ PK-BN DI10+ WH-PK
24 S9+ GY-BN DI9+ WH-GY
25 S8+ YE-BN DI8+ WH-YE
26 S7+ BN-GN DI7+ WH-GN
27 S6+ RD-BU DI6+ GY-PK
28 S5+ VT DI5+ BK
29 S4+ RD DI4+ BU
30 S3+ PK DI3+ GY
31 S2+ YE DI2+ GN
32 S1+ BN DI1+ WH
1)
Additional orange ring if one lead marking color is repeated.
Table 15: Pin Assignment for the System Cable Plug