It is the policy of Hiniker Company to constantly
improve its products whenever it is practical to
do so.
Hiniker Company must therefore reserve the
right to redesign or change its equipment or
component parts thereof without incurring the
obligation to install or furnish such changes on
the equipment previously delivered.
INSTRUCTIONS FOR ORDERING PARTS
1. The item numbers in the illustrations corre-
spond to the same item numbers in the de-
scription list. An assembly having a part
number can be ordered. All other parts must
be ordered individually. The quantity in the
“number required” column is the number of
parts used in this area of the machine. The
term “A/R” for number required indicates “as
required” where the quantity may vary. Or-
der all parts by their number and name. Do
not use the item number.
2. All references to left and right, front and rear
apply to the machine as viewed from the
rear of the machine, facing forward in the
direction of travel.
3. Always mention the identication number of
the model and serial numbers found on the
name plate of the unit on which the part is to
be used. Much delay and confusion can be
avoided when correct numbers are specied
on parts order and correspondence.
4. Owners, order all parts through your local
dealer.
PARTS
5. Dealers must indicate how to ship.
6. Collect phone calls are not accepted.
7. Address parts orders as follows:
HINIKER COMPANY
58766 240th St.
P.O. BOX 3407
MANKATO, MN 56002-3407 USA
Phone (800) 433-5620
Fax (800) 637-3991
INSTRUCTIONS FOR RETURNING PARTS
FOR ADJUSTMENT
1. To assure prompt handling of claims, your
dealer or distributor should follow standard
claim procedure and forward claims within
thirty (30) days of any part failure or mal-
function believed to be a warranty claim,
to Hiniker Company claims department for
processing.
2. No returned part will be accepted unless they
are transportation prepaid and accompa-
nied by the packing list copy of the returned
goods authorization form, or the packing list
copy of the warranty claim form.
3. Parts returned should have a tag attached
with sender’s name and address clearly
printed.
Part Number 81004224 Rev. E November 2010 Parts Books/Hiniker/81004224RevE
To Next Page
Loading...