Do you have a question about the Hiross Superchiller 2000 and is the answer not in the manual?
Brand | Hiross |
---|---|
Model | Superchiller 2000 |
Category | Controller |
Language | English |
Microface is an electronic control device for Hiross units.
Details the Microface layout, components, and physical connections.
Describes the display module and its connection to the Microface network.
Explains how to program the Microface via the operator interface.
Explains the procedure for entering a password to access parameters.
Refers to a table listing control parameters and sensor readings.
Details the connections for the Hirobus network.
Describes the Hiromatic G and its physical connections.
Front panel of the Hiromatic G, including display, buttons, and LEDs.
Guide to navigating the Hiromatic G menu system.
Window for modifying Unit or System Setpoints for external temperature.
Displays the status of all connected units.
Records and displays temperature data over time.
Stores and displays system and unit events and alarms.
Provides unit and system information (temperatures, pressures).
Counts operating hours for key components.
Defines standby unit count and operation mode.
Allows setting timers for unit operation or setpoint changes.
Sets temperature and pressure limits for warnings and alarms.
Configures network parameters and Hirolink connection.
Selects menu language, date, and time settings.
Contains important unit information; incorrect settings can cause damage.
Calibrates pressure and temperature sensors.
Allows manual operation and provides system status information.
Details jumpers on the Hiromatic G PCB and their functions.
Instructions for initial startup of a Microface-equipped unit.
Procedures for upgrading Microface software or replacing it.
Lists available spare parts with their corresponding codes.
Provides a comprehensive list of all alarms and warnings.
Detailed table of control parameters, their settings, and ranges.
Explains terms and parameters used in the manual.