Hirschmann GigaLION-24TP - Figure 3-15. Enabling and Configuring SMTP Alerts

Configuring the Switch
3-24
3
Web – Click System, Log, SMTP. Enable SMTP, specify a source email address,
and select the minimum severity level. To add an IP address to the SMTP Server
List, type the new IP address in the SMTP Server field and click Add. To delete an IP
address, click the entry in the SMTP Server List and click Remove. Specify up to five
email addresses to receive the alert messages, and click Apply.
Figure 3-15. Enabling and Configuring SMTP Alerts