Network Security
[ Network Security > 802.1X Port Authentication > Port Configuration ]
112
RM GUI GRS
Release
8.0
09/2019
Possible values:
1..300
(default setting:
90
)
Unauthenticated VLAN ID
Specifies the ID of the VLAN that the authenticator assigns to the port if the end device does not
login successfully. This value applies only on ports in which the
Port control
column contains the
value
auto
.
This function lets you grant end devices without valid login data access to selected services in the
network.
Possible values:
0..4042
(default setting:
0
)
The effect of the value
0
is that the authenticator does not assign a Unauthenticated VLAN to the
port.
Note: Assign to the port a VLAN set up statically in the device.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
To Next Page
Loading...
