Hirschmann GREYHOUND GRS1020 - RADIUS Authentication Server

Network Security
[ Network Security > RADIUS > Authentication Server ]
123
RM GUI GRS
Release
8.0 09/2019
4.4.2 RADIUS Authentication Server
[ Network Security > RADIUS > Authentication Server ]
This dialog lets you specify up to 8 authentication servers. An authentication server authenticates
and authorizes the users when the device forwards the login data to the server.
The device sends the login data to the specified primary authentication server. When the server
does not respond, the device contacts the specified authentication server that is highest in the
table. When no response comes from this server either, the device contacts the next server in the
table.
Table
Index
Displays the index number to which the table entry relates.
Name
Displays the name of the server.
To change the value, click the relevant field.
Possible values:
 Alphanumeric ASCII character string with 1..32 characters
(default setting: Default-RADIUS-Server )
Address
Specifies the IP address of the server.
Possible values:
 Valid IPv4 address
Destination UDP port
Specifies the number of the UDP port on which the server receives requests.
Possible values:
 0..65535 (default setting: 1812 )
Exception: Port 2222 is reserved for internal functions.
Secret
Displays ****** (asterisks) when you specify a password with which the device logs in to the server.
To change the password, click the relevant field.
Possible values:
 Alphanumeric ASCII character string with 1..64 characters
You get the password from the administrator of the authentication server.