Network Security
[ Network Security > ACL > Assignment ]
144
RM GUI GRS
Release
8.0
09/2019
Direction
Displays that the device applies the Access Control List to received data packets.
Priority
Displays the priority of the Access Control List.
Using the priority, you specify the sequence in which the device applies the Access Control Lists to
the data stream. The device applies the rules in ascending order starting with priority
1
.
Possible values:
1..4294967295
If an Access Control List is assigned to a port and to a VLAN with the same priority, then the device
applies the rules to the port first.
Active
Activates/deactivates the Access Control List on the port or in the VLAN.
Possible values:
marked
(default setting)
The Access Control List is active.
unmarked
The Access Control List is inactive.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
Opens the
Create
dialog to assign a rule to a port or a VLAN.
In the
Port/VLAN
field, you specify the port or the VLAN ID.
In the
Priority
field, you specify the source MAC address of the ARP rule.
In the
Direction
field, you specify the data packets to which the device applies the rule.
In the
Group name
filed, you specify which rule the device assigns to the port or VLAN.
To Next Page
Loading...
