Switching
[ Switching > Rate Limiter ]
151
RM GUI GRS
Release
8.0
09/2019
[Egress]
In this tab, you specify the egress transmission rate on the port.
Table
Port
Displays the port number.
Bandwidth [%]
Specifies the egress transmission rate.
Possible values:
0
(default setting)
The bandwidth limitation is disabled.
1..100
The bandwidth limitation is enabled.
This value specifies the percentage of overall link speed for the port in 1% increments.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
To Next Page
Loading...
