Switching
[ Switching > L2-Redundancy ]
198
RM GUI GRS
Release
8.0
09/2019
If you deactivate the function and set the value in the
Voice VLAN mode
column to
dot1p-priority
,
then voice devices require an authentication.
Possible values:
marked
(default setting)
If you activated the function in the Dialog
Network Security > 802.1X Port Authentication > Global
dialog, then set the
Port control
parameter for this port to the
multiClient
value before activating
this function. The parameter
Port control
you find in the
Network Security > 802.1X Port
Authentication > Global
dialog.
unmarked
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
5.9 L2-Redundancy
[ Switching > L2-Redundancy ]
The menu contains the following dialogs:
MRP
Spanning Tree
Link Aggregation
Link Backup
FuseNet
To Next Page
Loading...
