Diagnostics
[ Diagnostics > Status Configuration > Signal Contact > Signal Contact 1 ]
249
RM GUI GRS
Release
8.0
09/2019
[Port]
Table
Port
Displays the port number.
Propagate connection error
Activates/deactivates the monitoring of the link on the port/interface.
Possible values:
marked
Monitoring is active.
If the link interrupts on the selected port/interface, then the signal contact opens.
unmarked
(default setting)
Monitoring is inactive.
This setting takes effect when you mark the
Connection errors
checkbox in the
Global
tab.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
[Status]
Table
Timestamp
Displays the date and time of the event in the format,
Month Day, Year hh:mm:ss AM/PM
.
Cause
Displays the event which caused the SNMP trap.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
To Next Page
Loading...
