Diagnostics
[ Diagnostics > Report > Global ]
302
RM GUI GRS
Release
8.0
09/2019
Log SNMP set request
Enables/disables the logging of SNMP Set requests.
Possible values:
On
The logging is enabled.
The device registers SNMP Set requests as events in the syslog.
In the
Severity set request
drop-down list, you select the severity for this event.
Off
(default setting)
The logging is disabled.
Severity get request
Specifies the severity of the event that the device registers for SNMP Get requests.
Possible values:
emergency
alert
critical
error
warning
notice
(default setting)
informational
debug
Severity set request
Specifies the severity of the event that the device registers for SNMP Set requests.
Possible values:
emergency
alert
critical
error
warning
notice
(default setting)
informational
debug
CLI logging
Operation
Enables/disables the
CLI logging
function.
To Next Page
Loading...
