Advanced
[ Advanced > DHCP L2 Relay > Configuration ]
312
RM GUI GRS
Release
8.0
09/2019
Possible values:
marked
The device accepts DHCP packets with Option 82 information.
unmarked
(default setting)
The device discards DHCP packets received on non-secure ports that contain Option 82
information.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
[VLAN ID]
Table
VLAN ID
VLAN to which the table entry relates.
Active
Activates/deactivates the DHCP Layer 2 Relay function on the VLAN.
The prerequisite is that you enable the function globally.
Possible values:
marked
The DHCP Layer 2 Relay function is active.
unmarked
(default setting)
The DHCP Layer 2 Relay function is inactive.
Circuit ID
Activates or deactivates the addition of the Circuit ID to the Option 82 information.
Possible values:
marked
(default setting)
Enables Circuit ID and Remote ID to be sent together.
unmarked
The device sends only the Remote ID.
Remote ID type
Specifies the components of the Remote ID for this VLAN.
To Next Page
Loading...
