Advanced
[ Advanced > DHCP Server > Pool ]
319
RM GUI GRS
Release
8.0
09/2019
Remote ID
Specifies the identification of the remote device leasing the IP address.
Possible values:
1..80 bytes (format
XX XX .. XX
)
–
For the IP address assignment, the server ignores this variable.
Circuit ID
Specifies the Circuit ID of the device leasing the IP address.
Possible values:
1..80 bytes (format
XX XX .. XX
)
–
For the IP address assignment, the server ignores this variable.
Hirschmann device
Activates/deactivates Hirschmann multicasts.
If the device in this IP address range serves only Hirschmann devices, then activate this function.
Possible values:
marked
In this IP address range, the device serves only Hirschmann devices. Hirschmann multicasts
are activated.
unmarked
(default setting)
In this IP address range, the device serves the devices of different manufacturers. Hirschmann
multicasts are deactivated.
Configuration URL
Specifies the protocol to be used as well as the name and path of the configuration file.
Possible values:
Alphanumeric ASCII character string with 0..70 characters
Example:
tftp://192.9.200.1/cfg/config.xml
When you leave this field blank, the device leaves this option field blank in the DHCP message.
Lease time [s]
Specifies the lease time in seconds.
Possible values:
1..4294967294
(default setting:
86400
)
4294967295
Use this value for assignments unlimited in time and for assignments via BOOTP.
Default gateway
Specifies the IP address of the default gateway.
A value of
0.0.0.0
disables the attachment of the option field in the DHCP message.
To Next Page
Loading...
