Hirschmann GREYHOUND GRS1020 - Access to the Command Line Interface Using SSH (Secure Shell)

User interfaces
1.2
Command Line Interface
19
UM Config GRS
Release
8.0 09/2019
1.2.3 Access to the Command Line Interface using SSH (Secure Shell)
In the following example we use the PuTTY program. Another option to access your device using
SSH is the OpenSSH Suite.
Proceed as follows:
 Start the PuTTY program on your computer.
Figure 4: PuTTY input screen
 In the Host Name (or IP address) field you enter the IP address of your device.
The IP address consists of 4 decimal numbers with values from 0 to 255 . The 4 decimal numbers
are separated by points.
 To specify the connection type, select the SSH radio button in the Connection type range.
After selecting and setting the required parameters, the device enables you to set up the data
connection using SSH.