User interfaces
1.2
Command Line Interface
21
UM Config GRS
Release
8.0
09/2019
Figure 6: Start screen of the Command Line Interface
1.2.4 Access to the Command Line Interface using the serial interface
The serial interface is used to locally connect an external network management station (VT100
terminal or PC with terminal emulation). The interface lets you set up a data connection to the
Command Line Interface and to the system monitor.
login as: admin
admin@192.168.1.5’s password:
Copyright (c) 2011-2019 Hirschmann Automation and Control GmbH
All rights reserved
GRS1020 Release 8.0
(Build date 2019-02-05 19:17)
System Name : GRS-ECE555B996DC
Management IP : 192.168.1.5
Subnet Mask : 255.255.255.0
Base MAC : EC:E5:55:01:02:03
System Time : 2019-01-01 17:39:01
NOTE: Enter '?' for Command Help. Command help displays all options
that are valid for the particular mode.
For the syntax of a particular command form, please
consult the documentation.
GRS>
VT 100 terminal settings
Speed
9600 bit/s
Data
8 bit
Stopbit
1 bit
Handshake
off
Parity
none
To Next Page
Loading...
