Hirschmann GREYHOUND GRS1020 - 2.5 Mounting a Media Module (Optional); Mounting Procedure

Basic Settings
[ Basic Settings > Load/Save ]
38
RM GUI GRS
Release
8.0 09/2019
Select
Designates the configuration profile highlighted in the table as “Selected”. In the Selected column,
the checkbox is then marked .
When applying the function Undo configuration modifications or during a restart, the device loads the
settings of this configuration profile to the volatile memory ( RAM ).
 If the configuration encryption in the device is disabled, then designate an unencrypted
configuration profile only as “Selected”.
 If the configuration encryption in the device is enabled and the password of the configuration
profile matches the password saved in the device, then designate an encrypted configuration
profile only as “Selected”.
Otherwise, the device is unable to load and encrypt the settings in the configuration profile the next
time it restarts. For this case you specify in the Diagnostics > System > Selftest dialog whether the
device starts with the default settings or terminates the restart and stops.
Note: You only mark the configuration profiles saved in the non-volatile memory ( NVM ).
If in the Basic Settings > External Memory dialog the checkbox in the Backup config when saving column
is marked, then the device designates the configuration profile of the same name in the external
memory as “Selected”.
Import...
Opens the Import... window to import a configuration profile.
The prerequisite is that you have exported the configuration profile using the Export... button or
using the link in the Profile name column.
 In the Select source drop-down list, select from where the device imports the configuration profile.
 PC/URL
The device imports the configuration profile from the local PC or from a remote server.
 External memory
The device imports the configuration profile from the external memory.
 When PC/URL is selected above, in the Import profile from PC/URL frame you specify the
configuration profile file to be imported.
– Import from the PC
When the file is located on your PC or on a network drive, drag and drop the file in the
area. Alternatively click in the area to select the file.
– Import from an FTP server
When the file is located on an FTP server, specify the URL for the file in the following form:
ftp://<user>:<password>@<IP address>:<port>/<file name>
– Import from a TFTP server
When the file is located on a TFTP server, specify the URL for the file in the following form:
tftp://<IP address>/<path>/<file name>
– Import from an SCP or SFTP server
When the file is located on an SCP or SFTP server, specify the URL for the file in one of the
following forms:
scp:// or sftp://<IP address>/<path>/<file name>
When you click the Start button, the device displays the Credentials window. There you enter
User name and Password , to log on to the server.
scp:// or sftp://<user>:<password>@<IP address>/<path>/<file name>