Hirschmann GREYHOUND GRS1020 - Managing User Accounts; Default Setting

Access to the device
3.2
User management
61
UM Config GRS
Release
8.0 09/2019
3.2.2 Managing user accounts
You manage the user accounts in the Graphical User Interface or in the Command Line Interface.
Perform the following steps:
3.2.3 Default setting
In the state on delivery, the user accounts admin and user are set up in the device.
Change the password for the admin user account before making the device available in the
network.
 Open the Device Security > User Management dialog.
The dialog displays the user accounts that are set up.
show users
Displays the user accounts that are set up.
Table 12: Default settings for the factory setting user accounts
Parameter Default setting
User name admin user
Password private public
Role administrator guest
User locked unmarked unmarked
Policy check unmarked unmarked
SNMP auth type hmacmd5 hmacmd5
SNMP encryption type des des