Basic Settings
[ Basic Settings > External Memory ]
43
RM GUI GRS
Release
8.0
09/2019
Possible values:
marked
(default setting)
The loading of the RSA key is activated.
During a restart, the device loads the RSA key from the external memory when the following
files are located in the external memory:
– SSH RSA key file
– a text file “startup.txt” with the content
autoUpdateRSA=<filename_of_the_SSH_RSA_key>
The device displays messages on the system console of the serial interface.
unmarked
The loading of the RSA key is deactivated.
Note: When loading the RSA key from the external memory (
ENVM
), the device overwrites the
existing keys in the non-volatile memory (
NVM
).
Config priority
Specifies the memory from which the device loads the configuration profile upon reboot.
Possible values:
disable
The device loads the configuration profile from the non-volatile memory (
NVM
).
first
The device loads the configuration profile from the external memory.
When the device does not find a configuration profile in the external memory, it loads the
configuration profile from the non-volatile memory (
NVM
).
Note: When loading the configuration profile from the external memory (
ENVM
), the device
overwrites the settings of the Selected configuration profile in the non-volatile memory (
NVM
).
If the
Config priority
column has the value
first
and the configuration profile is unencrypted, then
the
Security status
frame in the
Basic Settings > System
dialog displays an alarm.
In the
Diagnostics > Status Configuration > Security Status
dialog,
Global
tab,
Monitor
column you specify
whether the device monitors the
Load unencrypted config from external memory
parameter.
Backup config when saving
Activates/deactivates creating a copy of the configuration profile in the external memory.
Possible values:
marked
(default setting)
Creating a copy is activated. When you click in the
Basic Settings > Load/Save
dialog the
Save
button, the device generates a copy of the configuration profile on the active external memory.
unmarked
Creating a copy is deactivated. The device does not generate a copy of the configuration profile.
Manufacturer ID
Displays the name of the memory manufacturer.
Revision
Displays the revision number specified by the memory manufacturer.
To Next Page
Loading...
