Basic Settings
[ Basic Settings > Port ]
45
RM GUI GRS
Release
8.0
09/2019
1.7 Port
[ Basic Settings > Port ]
This dialog lets you specify settings for the individual ports. The dialog also displays the operating
mode, connection status, bit rate and duplex mode for every port.
The dialog contains the following tabs:
[Configuration]
[Statistics]
[Utilization]
[Configuration]
Table
Port
Displays the port number.
Name
Name of the port.
Possible values:
Alphanumeric ASCII character string with 0..64 characters
The following characters are allowed:
–
<space>
–
0..9
–
a..z
–
A..Z
–
!#$%&'()*+,-./:;<=>?@[\\]^_`{}~
Port on
Activates/deactivates the port.
Possible values:
marked
(default setting)
The port is active.
unmarked
The port is inactive. The port does not send or receive any data.
State
Displays whether the port is currently physically enabled or disabled.
To Next Page
Loading...
