Network load control
10.2
Multicasts
120
UM Config GRS
Release
8.0
09/2019
Prerequisite:
The
IGMP Snooping
function is enabled globally.
Perform the following steps:
Open the
Switching > IGMP Snooping > Multicasts
dialog.
In the
Configuration
frame, you specify how the device sends data packets to unknown
Multicast addresses.
send to registered ports
The device forwards packets with unknown Multicast address to every query port.
send to query and registered ports
The device forwards packets with unknown Multicast address to every port.
In the
Known multicasts
column, you specify how the device sends data packets to known
Multicast addresses in the corresponding VLAN. Click the relevant field and select the
desired value.
To save the changes temporarily, click the button.
To Next Page
Loading...
