Network load control
10.4
QoS/Priority
126
UM Config GRS
Release
8.0
09/2019
10.4.6 Queue management
Defining settings for queue management
Perform the following steps:
Open the
Switching > QoS/Priority > Queue Management
dialog.
The total assigned bandwidth in the
Min. bandwidth [%]
column is 100%.
To activate Weighted Fair Queuing for
Traffic class
=
0
, proceed as follows:
Unmark the checkbox in the
Strict priority
column.
In the
Min. bandwidth [%]
column, specify the value
5
.
To activate Weighted Fair Queuing for
Traffic class
=
1
, proceed as follows:
Unmark the checkbox in the
Strict priority
column.
In the
Min. bandwidth [%]
column, specify the value
20
.
To activate Weighted Fair Queuing for
Traffic class
=
2
, proceed as follows:
Unmark the checkbox in the
Strict priority
column.
In the
Min. bandwidth [%]
column, specify the value
30
.
To activate Strict Priority for
Traffic class
=
3
, proceed as follows:
Mark the checkbox in the
Strict priority
column.
To activate Weighted Fair Queuing for
Traffic class
=
4
, proceed as follows:
Unmark the checkbox in the
Strict priority
column.
In the
Min. bandwidth [%]
column, specify the value
10
.
To save the changes temporarily, click the button.
enable
Change to the Privileged EXEC mode.
configure
Change to the Configuration mode.
cos-queue weighted 0
Enabling Weighted Fair Queuing for traffic class
0
.
cos-queue min-bandwidth: 0 5
Assigning a weight of
5
% to traffic class
0
.
cos-queue weighted 1
Enabling Weighted Fair Queuing for traffic class
1
.
cos-queue min-bandwidth: 1 20
Assigning a weight of
20
% to traffic class
1
.
cos-queue weighted 2
Enabling Weighted Fair Queuing for traffic class
2
.
cos-queue min-bandwidth: 2 30
Assigning a weight of
30
% to traffic class
2
.
show cos-queue
Queue Id Min. bandwidth Scheduler type
-------- -------------- --------------
0 5 weighted
1 20 weighted
2 30 weighted
3 0 strict
4 0 strict
5 0 strict
6 0 strict
7 0 strict
To Next Page
Loading...
