VLANs
11.1
Examples of VLANs
135
UM Config GRS
Release
8.0
09/2019
For this example, the status of the TAG field of the data packets has no relevance, so you use the
setting
U
.
Perform the following steps:
Setting up the VLAN
Table 19: Ingress table
Terminal Port Port VLAN identifier (PVID)
A 1 2
B 2 3
C 3 3
D 4 2
5 1
Table 20: Egress table
VLAN ID Port
1 2 3 4 5
1 U
2 U U
3 U U
Open the
Switching > VLAN > Configuration
dialog.
Click the button.
The dialog displays the
Create
window.
In the
VLAN ID
field, specify the value
2
.
Click the
Ok
button.
For the VLAN, specify the name
VLAN2
:
Double-click in the
Name
column and specify the name.
For VLAN
1
, in the
Name
column, change the value
Default
to
VLAN1
.
Repeat the previous steps to create a VLAN
3
with the name
VLAN3
.
enable
Change to the Privileged EXEC mode.
vlan database
Change to the VLAN configuration mode.
vlan add 2
Creates a new VLAN with the VLAN ID
2
.
name 2 VLAN2
Assign the name
2
to the VLAN
VLAN2
.
vlan add 3
Creates a new VLAN with the VLAN ID
3
.
name 3 VLAN3
Assign the name
3
to the VLAN
VLAN3
.
name 1 VLAN1
Assign the name
1
to the VLAN
VLAN1
.
To Next Page
Loading...
