Hirschmann GREYHOUND GRS1020 - Immunity Characteristics

Basic Settings
[ Basic Settings > Port ]
49
RM GUI GRS
Release
8.0 09/2019
Possible values:
 marked
The Link monitoring function is active.
If the device recognizes an established link, then the port LED illuminates. If the device
recognizes that a link has been lost, then the port LED extinguishes.
 unmarked (default setting)
The Link monitoring function is inactive.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13.
Clear port statistics
Resets the counter for the port statistics to 0 .
[Statistics]
This tab displays the following overview per port:
 Number of data packets/bytes received in the device
– Received packets
– Received octets
– Received unicast packets
– Received multicast packets
– Received broadcast packets
 Number of data packets/bytes sent from the device
– Transmitted packets
– Transmitted octets
– Transmitted unicast packets
– Transmitted multicast packets
– Transmitted broadcast packets
 Number of errors detected by the device
– Received fragments
– Detected CRC errors
– Detected collisions
 Number of data packets per size category received on the device
– Packets 64 bytes
– Packets 65 to 127 bytes
– Packets 128 to 255 bytes
– Packets 256 to 511 bytes
– Packets 512 to 1023 bytes
– Packets 1024 to 1518 bytes
 Number of data packets discarded by the device
– Received discards
– Transmitted discards
To sort the table by a specific criterion click the header of the corresponding row.
For example, to sort the table based on the number of received bytes in ascending order, click the
header of the
Received octets column once. To sort in descending order, click the header again.