Operation diagnosis
13.15
Copper cable test
220
UM Config GRS
Release
8.0
09/2019
13.15 Copper cable test
Use this feature to test copper cables attached to an interface for a short or open circuit. The test
interrupts traffic flow, when in progress, on this port.
The table displays the state and lengths of each individual pair. The device returns a result with the
following meaning:
normal - indicates that the cable is operating properly
open - indicates an interruption in the cable
short circuit - indicates a short circuit in the cable
untested - indicates an untested cable
Unknown - cable unplugged
To Next Page
Loading...
