Hirschmann GREYHOUND GRS1020 - Page 585

Setting up the configuration environment
A.1
Setting up a DHCP/BOOTP server
245
UM Config GRS
Release
8.0 09/2019
 Enter the path and the file name for the configuration file.
 Click the Apply button and then the OK button.
Figure 59: Configuration file on the tftp server
 Add a profile for each device type.
When devices of the same type have different configurations, you add a profile for each
configuration.
 To complete the addition of the configuration profiles, click the OK button.
Figure 60: Managing configuration profiles
 To enter the static addresses, in the main window, click the Static button.
Figure 61: Static address input
 Click the Add button.
Figure 62: Adding static addresses
 Enter the MAC address of the device.