Hirschmann GREYHOUND GRS1020 - Preparing Access Via SSH; Generating a Key in the Device

Setting up the configuration environment
A.3
Preparing access via SSH
250
UM Config GRS
Release
8.0 09/2019
A.3 Preparing access via SSH
To access the device using SSH, perform the following steps:
 Generate a key in the device.
or
 Transfer your own key onto the device.
 Prepare access to the device in the SSH client program.
Note: In the default setting, the key is already existing and access using SSH is enabled.
A.3.1 Generating a key in the device
The device lets you generate the key directly in the device.
Perform the following steps:
 Open the Device Security > Management Access > Server dialog, SSH tab.
 Disable the SSH server.
To disable the function, select the Off radio button in the Operation frame.
 To save the changes temporarily, click the button.
 To create a RSA key, in the Signature frame, click the Create button.
 Enable the SSH server.
To enable the function, select the On radio button in the Operation frame.
 To save the changes temporarily, click the button.
enable
Change to the Privileged EXEC mode.
configure
Change to the Configuration mode.
ssh key rsa generate
Generate a new RSA key.