Hirschmann GREYHOUND GRS1020 - Page 90

Device Security
[ Device Security > Management Access > IP Access Restriction ]
89
RM GUI GRS
Release
8.0 09/2019
Possible values:
 Valid IPv4 address (default setting: 0.0.0.0 )
Netmask
Specifies the range of the network specified in the Address column.
Possible values:
 Valid netmask (default setting: 0.0.0.0 )
HTTP
Activates/deactivates the HTTP access.
Possible values:
 marked (default setting)
Access is activated for the adjacent IP address range.
 unmarked
Access is deactivated.
HTTPS
Activates/deactivates the HTTPS access.
Possible values:
 marked (default setting)
Access is activated for the adjacent IP address range.
 unmarked
Access is deactivated.
SNMP
Activates/deactivates the SNMP access.
Possible values:
 marked (default setting)
Access is activated for the adjacent IP address range.
 unmarked
Access is deactivated.
Telnet
Activates/deactivates the Telnet access.
Possible values:
 marked (default setting)
Access is activated for the adjacent IP address range.
 unmarked
Access is deactivated.
SSH
Activates/deactivates the SSH access.