Hirschmann GREYHOUND GRS1030 - Removing a Media Module (Optional)

Installation GRS1020/1120/1030/1130
Release 03 01/2017
45
6.3 Removing a media module (optional)
Figure 8: Demounting a media module
 Loosen the screws in the front panel of the media module.
 Open the lock of the media module by pressing the locking lever outwards
(steps 1 and 2).
 Pull the media module out of the slot (step 3).
 Close the media module slot on the basic device using a cover panel.
 Fasten the cover panel using the 2 screws on the basic device.
1
3
2