10
MACH 4002
Release
1.0
10/05
About this manual
The following manuals are included as PDF files on the enclosed CD ROM:
D User manual “Installation”
D User manual “Basic configuration”
D User manual “Redundancy configuration”
D User manual "Router configuration"
D Reference manual “Web-based Interface” and
D Reference manual “Command Line Interface”
If you use Network Management Software HiVision you have further
opportunities to:
D have an event logbook.
D configure the “System Location” and “System Name”.
D configure the network address range and SNMP parameters.
D save the configuration on the Switch.
D simultaneous configuration of several Switches.
D configure the relevant ports to be displayed red if there is no link state.
With the network management software Industrial HiVision you increase net-
work security in industrial applications:
D Early Warning System
D Easy monitoring of industrial networks
D Fast Display
D Interface with diagnostic and configuration programs
D Low deployment cost
Legend
The commendations used in this manual have the following meanings:
D Listing
V Work step
U Subheading
To Next Page
Loading...
