Hirschmann OZD Profi 12M G11 - Page 58

58
Installation OZD Profi 12M ...
Release 01 07/2017
Climatic conditions during operation
Ambient temperature
 OZD Profi 12M ...
without “EEC” feature
 OZD Profi 12M ... with
feature “EEC”
a
+32 °F ... +140 °F
(0 °C ... +60 °C)
+32 °F ... +140 °F
(0 °C ... +60 °C)
−4 °F ... +140 °F
(−20 °C ... +60 °C)
+32 °F ... +140 °F
(0 °C ... +60 °C)
−4 °F ... +140 °F
(−20 °C ... +60 °C)
Humidity 5 % ... 95 %
(non-condensing)
Air pressure minimum 700 hPa (+9842 ft; +3000 m)
Climatic conditions during storage
Ambient temperature −40 °F ... +158 °F (−40 °C ... +70 °C)
Humidity 5 % ... 95 %
(non-condensing)
Air pressure minimum 700 hPa (+9842 ft; +3000 m)
Pollution degree 2
Protection classes Laser protection Class 1 in compliance with IEC 60825-1
Degree of protection IP20
a. The OZD Profi 12M G12(-1300) can also be supplied in a special design for more severe
environmental conditions. This variant is designated the OZD Profi 12M G12(-1300) EEC.
The DIP switches on the OZD Profi 12M G12(-1300) EEC may also only be operated at
ambient temperatures between +32 °F ... +140 °F (0 °C ... + 60 °C).
Optical port P G G-1300
Wavelength 650 nm 860 nm 1300 nm
Launchable optical power: - - -
in fiber 10/125 (default) - - -19 dBm
in fiber 50/125 (default) -17 dBm -17 dBm
in fiber 62.5/125 (default) - -13 dBm -17 dBm
in fiber 200/230/125 (default) -17 dBm - -
in fiber 200/230/125 (reduced) - 13 dBm -
in fiber 980/1000 (default) -5 dBm - -
in fiber 980/1000 (reduced) -10 dBm - -
Receiver sensitivity -25 dBm -28 dBm -29 dBm
Receiver overload limit 0 dBm -1 dBm -3 dBm
Damping values of the fiber
optic
P G G-1300
Wavelength 650 nm 860 nm 1300 nm
Damping values:
Fiber 10/125 - - 0.5 dB/km
Fiber 50/125 - 3 dB/km 1 dB/km
Fiber 62.5/125 - 3.5 dB/km 1 dB/km
Fiber 200/230 10 dB/km 8 dB/km -
Fiber 980/1000 0.225 dB/m - -
Transmission distance
a
P G G-1300
Wavelength 650 nm 860 nm 1300 nm
System reserve 2 dB 3 dB 2 dB