Hisense HCHS-N06X - 4 Switch Box Installation; Factory-Supplied Accessories

4.
Switch Box Installation
●
Do not install the Switch Box in a
flammable environment to avoid fire or an
explosion.
4.1 Factory-SuppliedAccessories
Checktoensurethatthefollowing
accessoriesarepackedwiththeSwitch Box.
Table4.1Factory-SuppliedAccessories
NOTE
● Check to ensure that the ceiling slab is strong
enough.
●
Do not install the Switch Box outdoors.
If installed outdoors, an electric hazard or
electric leakage may occur.
● Installation WARNING: Ensure that all safety
features, disconnects and interlocks are
in place and functioning properly prior to
putting the equipment into operation. Never
by-pass or jump-out any safety device or
switch.
Ifanyoftheseaccessoriesarenotpackedwiththe
unit,pleasecontactyourdistributor.
Unit:mm(inch)
No. Accessory HCHS-N06X Q’ty HCHS-N10X Q’ty
(1) Reducer
ID15.88
(ID5/8)
ID19.05
(ID3/4)
1
-
-
(2)
AccessoryPipe
(forFlareNut)
OD12.7
(OD1/2)
OD15.88
(OD5/8)
2
ID22.4
(ID7/8)
OD19.05
(OD3/4)
2
(3)
ID19.3
(ID3/4)
OD19.05
(OD3/4)
1
ID19.3
(ID3/4)
OD19.05
(OD3/4)
2
(4)
-
-
ID19.3
(ID3/4)
OD15.88
(OD5/8)
1
(5)
Insulation
Material
ID16
(ID5/8)
2 1
(6)
ID20
(ID13/16)
1
-
-
(7)
ID22
(ID7/8)
-
- 2
(8)
ID38
(ID1-1/2)
2 1
(9)
ID43
(ID1-11/16)
1 2
(10) Clamp 6 6
4