Hisense HCHS-N06X - Electrical Wiring Connection

6.2 ElectricalWiringConnection
(1) PerformtheelectricalwiringworkfortheSwitch Boxes.Selectthewiresizeaccordingtothetablebelow.
(2) PayattentiontothemarksontheterminalblockwhenconnectingwiresforSwitch Box and I.U./O.U.
Referto“ExampleofElectricalWiring”forthewiringconnectiononthenextpage.
NOTES:
(1) The field wiring shall be conducted according to local laws.
(2) The sizes of above power lines shall comply with relevant standards.
(3) The shielded wire shall be used for the control system and be grounded.
(4) The sheathed lines shall be used for power lines and shall be copper conductors.
(5) In case of tandem connection of power lines, the current values shall be added up to select the electric wire.
ELB: Earth Leakage Circuit
Breaker Remarks:
40
63
32
25
16
10
6
6
16
10
25
32
40
2
63
*
*2: In the case that currennt exceeds 63A,do not connect cables in series.
Selection According to EN60 335-1
Currect i(A)
Wire Size (mm
2
)
2.5
2.5
4.0
6.0
16.0
10.0
2.5
EN60335-1
EN60335-1
HCHS-N06X
HCHS-N10X
220-240V～
50Hz
220V～60Hz
-
0.75
Nominal
Current(A)
Nominal Sensitive
Current(mA)
HCHS-N06X
HCHS-N10X
-
15
15
30
ELB
Model
Power
Supply
Max.Running
Current(A)
220-240V～
50Hz
220V～60Hz
Fuse(A)
0.75
ElectricalDataandRecommendedWiring,BreakerSize/1 Outdoor Unit
Field Minimum Wire Sizes for Power Source
16