Hisense HCHS-N06X - Electrical Wiring

PCB1
CN1 CN2
PCN1
TB1
TB2
Terminal Block
for Power Supply
Power Supply Wiring
Ground Wiring
Communication Cable
to Outdoor Unit
Communication Cable
to Indoor Unit
Connecting Hole for
Communication Cable
Connecting Hole for
Power Supply Wiring
Terminal Block
for Communication
Cable Clamp
Figure6.1ElectricalWiringConnection
6.3 ElectricalWiring
TheelectricalwiringconnectionfortheSwitch BoxisshowninFigure
(1
) TurnOFFthemainpowerswitchandtakeofftheelectricalboxcoverofSwitch Box .
(2) ConnectthepowersupplywiringtoL1andL2ontheterminalblockTB1,andconnectgroundwiringto
theterminalsintheelectricalbox.
(3) Connectthecommunicationcableto“1”,“2”,“3”and“4”ontheterminalblockTB2mountedonPCB1.
(4) Tightlyclampthewiresusingthecableclampinsidetheelectricalbox.
(5) Attachtheelectricalboxcoveraftercompletingthewiringwork.
NOTE:
TheaccessorynumbersarelistedinTable4.1.
17