Mode Setting
OSD Language
Country
Scan Type
Auto Tuning
Installation Guide
Home Mode
Australia
DTV+ATV
English
“In Shop Mod, your settings will
not be saved.”
Are you sure to select Shop
Mode?
Yes No
Using the Installation Guide Menu
The Installation Guide menu appears the first time you
turn on the TV. It will assist you to specify the Mode
Settings, OSD Language, Country, Scan Type and Auto
Tuning.
● Make sure that you have:
Installed the remote control batteries.
Connected an antenna or cable.
Connected the power cord.
● Press [POWER Switch] to turn on your TV. The
Installation Guide menu displays.
■ Mode Setting - Press [◄/► ] to select your Mode Setting: Home Mode or Shop Mode.
-Shop mode is only intended for commercial environments. Personal viewing preferences will not be retained
after turning the unit off.
-Home Mode is the recommended setting which offers full functionality of the television.
■ OSD Language – Press [◄/► ] to select your OSD Language.
■ Country – Press [◄/► ] to select your Country.
■ Scan Type – Press [◄/► ] to select the desired signals to be found ATV, DTV+ATV or DTV.
■ Auto Tuning - Press [►/OK ] to automatically start tuning channels available in your viewing area.
If you press [Menu] to select Skip, your TV disconfirms the correct search.
Select exit to terminate the auto – tuning process.
To Next Page
Loading...
Need help?
General