Hisense HYE-W01 - Product Description; Remote Control Overview; Button Descriptions

2
4.
Product Description
Wireless remote control
●
Wireless remote control is a device transmitting instructions on operation
mode and time setting to indoor unit. Point the remote control to signal
receiver on indoor unit and press relevant button to send IR signals for
communication.
●
The maximum transmission distance is about 5 meters (the distance
may be shorter when transmission path of IR signals is not perpendicular
to the receiver or there is any electronic lighting device nearby).
Button Description:
Start/Stop:
Press the button to start remote
control, and pr ess it again to shut
down the remote control.
Mode
For toggling between operation
modes
Cool
Used to set operation mode to
cooling
Heat
Used to set operation mode to
heating
For selection of airflow velocity
Used for setting of indoor
temperature
ECO
Press it to operate air conditioner in
power-saving mode
Used to set 3D/strong airflow
Sleep
Press it to operate air conditioner in
sleep mode
Mute
Press it to operate air conditioner in
mute mode
S.H.
Press it to operate air conditioner in
strong heating mode
Green
Press it to operate air conditioner in
health mode
Airflow
Direction
Vertical
airflow
Horizontal
airflow
Set horizontal airflow
direction
Set vertical airflow
direction
After shutdown, press it to schedule start-up
of the air conditioner
After start-up, press it to schedule shutdown
of the air conditioner
When any sc heduled start-up/shut down
has been set, press the button to cancel it
Reset
●After cleaning of filter screen is finished, long pr ess Mute to remove Filter Screen in dic ation
on indoor unit.
●When any protective device stops operating, long press Mute to cancel control after the
failure has been removed.
Cool
Mode
Air
velo
city
S.H.
heati
ng
Green
Mute
Sleep
3D/S.
Timer
Ver.
Hor.
Heat
Reset
ECO
savi
ng
Signal
transmitter
This indicator will keep flas hing while signals are
being transmitted (wi th re mote control pointed
straightly to the receiver on indoor unit).
Signal
transmission
indicator
Display
screen
Displays set tempera ture, operating time , air deflec tor
position, operation mode and air volume type.
Since all available in formation is displayed on the
screen as shown in this manual, actual d isplay may
vary depending on the operation status.
3D/S.
Temperature
Speed
Timer