Hisense HYXE-M01H - Run;Stop for each Group; Operation Mode Change

2. Selected group setting will be indicated on the touchscreen display. Touch “RUN” or “STOP”.
3. Touch “
OK ” to confirm and return.
4. Touch “
Cancel ” to cancel the command and return.
AC Monitor (All Groups) AC Monitor (Block)
(1) (1)
(1) (1)
AC Monitor (All Groups) AC Monitor (Block)
6.5 RUN/STOP FOR EACH GROUP
1. Select the screen of “AC Monitor (All Groups)” or “AC Monitor (Block)”. Select the group to set by touching the group button.
6.6 OPERATION MODE CHANGE
1. Select the screen of “AC Monitor (All Groups)” or “AC Monitor (Block)”. Select the group to set by touching the group button.
(2) (3)
HYJM-S01H
199