Hisense LMS044M6RVE User Manual

Reversing the Door
The side at which the door opens can be
changed from the right side (as supplied) to the
left side, if the installation site requires.
Tools you will need:
1. 8SFODINN
2. 1IJMJQT4DSFXESJWFS
3. Putty knife or thin-blade screwdriver
Before you start lay the refrigerator on it’s back in
order to gain access to the base, you should rest
it on soft foam packaging or similar material to
avoid damaging the cooling pipes at the rear of
the refrigerator.
༄
SƉĞĐŝĂůĨůĂŶŐĞƐĞůĨͲƚĂƉƉŝŶŐƐĐƌĞǁ
༇Special flange self-tapping screw
༅
UƉƉĞƌŚŝŶŐĞ
༈Bottom feet
༃
UƉƉĞƌŚŝŶŐĞĐŽǀĞƌ
༆
Lower hinge
༉
Screw hole cover
Ɣ Opentherefrigeratordoorandremoveallfittingsinsidethedoor.
Ɣ Removetheupperhingecover
ķ
༃.
Ɣ Removethetwoscrews༄ĸthatconnecttheupperhinge༅
Ĺ
ontherightsideofthecabinettop.
Ɣ Carefullyliftthedoorandplaceitonapaddedsurfacetopreventscratching.
ĺ
andtransferittotheuncoveredholeontherightside
oftheunit.Besure
topressthebuttonfirmlyinto
thehole.
Ɣ
༈
that

hold
the
lowerhinge ontherightsideofthecabinet.
Ɣ
Removethebottomfeet༉andtransferittotherightsideofthecabinet.
Ɣ Setthedoorintoitsnewplacemakingsurethepinentersthebushingatthelowerframesection(hole).
previouslyremovedinstep5 ontheleftsideoftheunit.Makesurethepinentersthe
bushingonthe
Ɣ Looselysecurethelowerhinge
anddonottightenthe
boltsuntilthedoorisintheclosedpositionandleveled.
Ɣ Replacetheupperhingecover༃
ķ
.
Ɣ Turn
thedoorupright
again.
Ɣ Openthedoorandattachallfittings.
Ɣ
Removethescrew hole cover
Ľ
Remove the two screwsĻ
ļ
ĺ
8
upperframesection(hole).
Ɣ Securetheupperhinge

Ĺ

Hisense LMS044M6RVE Specifications

General

Brand	Hisense
Model	LMS044M6RVE
Category	Refrigerator
Language	English