Hisense RB403N4EW1 - Upper Door Removal and Reversal

③Upper cover of upper door
②Upper hinge cover (right)
①Upper cover
④Corner cover
3. Take down the corner cover.
Note: Please hold the upper door by hand
during step 4 to prevent door dropping.
4. Remove the screws ①, and
remove part②.
5. Remove the upper door and place it
on a smooth surface with its panel
upwards. Loose screws③, detach part
② and part ①then install part ①and
another part (in the plastic bag)to the
left side with screws③.Put part② just
detached back to plastic bag.
②
6. Loose screws used to fix the middle
hinge and remove middle hinge. Then
remove the lower door.
1 2
3
3
Special flange self-tapping
screws
②
③
①
② Stop block
③ Self-tapping screws
① Door holder
Hisense Refrigerator
6
①
②
part
1
7. Place the lower door on a smooth
surface with its panel upwards. Loose
screws③ detach part② and part
①.Turn part① by 180°and then install
①and part② to corresponding position
on left side together with screws③.
，