37
818898
CONTROL UNIT STANDBY MODE
30 second after you have pressed the most recent key, the control
unit switches to standby mode. All indicators on the control unit will
be switched off. There are exceptions when some indicators remain lit
although the control unit is in standby mode. Such exceptions include the
following:
• If intensive freezing (freezer boost) is
activated, then the indicator C1 will
remain lit All other indicators are o .
• If the Eco function is acticated, the
indicator D1 will still be displayed in
standby mode. All other indicators
are o .
• If the manual freezer compartment
defrosting function is activated, then
CL will still be displayed on the B3
display unit, even when the control
unit is in the standby mode. All other
indicators are o .
To switch back from the standby
mode: briefly press the B key or open
the refrigerator compartment door.
If the Eco function or the intensive
freezing (freezer boost) function
are activated, then the C or D key,
respectively, may also be used to
switch back from the control unit
standby mode, depending on which
function is activated.
To Next Page
Loading...
