Hisense RR220D4ADF User Manual

cross
screwdrawer
rubber supporting pad
screw
First use an installation
2.Put screw into the hole of rubber
supporting pad.
3.Make screw in alignment with the hole on
lower base cover . Fasten rubber supporting
pad to the base cover firmly by a cross
screw driver (self-provided).
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be in stable contact with
the floor. You can also adjust the level by
unscrewing the appropriate level
adjustment in the front (use your fingers or
a suitable spanner).
Leveling
Caution! Any electrical work required to
install this appliance should be carried out by
qualified or authorized personnel.
Warning! This appliance must be grounded.
The manufacturer declines any liability should
these safety measures not be observed.
Electrical connection
10

Hisense RR220D4ADF Specifications

General

Door hinge	Right
Product color	Silver
Reversible doors	No
Custom panel-ready	Yes
Appliance placement	Freestanding
Number of vegetable drawers	2
Fridge number of shelves/baskets	3
Lamp type	LED
AC input voltage	220-240V~ V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Annual energy consumption	178 kWh
Noise level	40 dB
Climate class	N-ST
Cooling system	Static
Total net capacity	165 L
Fridge net capacity	149 L
Gross weight	35500 g
Country of origin	China
Freezer net capacity	15 L
Package depth	565 mm
Package width	542 mm
Package height	1332 mm
Package weight	Weight of the packaged product in gram.
Freezer position	Top-placed

Weight and Dimensions

Depth	513 mm
Width	519 mm
Height	1280 mm
Weight	32000 g